Periwal Polymers has been in the PVC compounding business for almost three decades. Established in 1994” Periwal Polymers Private Limited”
F443 (A,B & C), RIICO Industrial Area, Phase-I, Bhiwadi, District Alwar 301019 (Rajasthan).
+91-9971906682
PF 20 is a FR PVC compound for insulation application. PF 20 is formulated with a premium quality resin, plasticizers, stabilizers, and other additives.
| Property | Unit | Test Method | |
| Sp. Gravity @270C | ASTM D 792 | 1.55± 0.02 | |
| Hardness @270C | Shore A | ASTM D 2240 | 85± 2 |
| Thermal Stability@2000C | Minutes | IS 10810 (60) | ≥ 80 |
| Tensile Strength (TS) @270C | MPa | IS 10810 (7) | ≥ 12.5 |
| Elongation at Break (E.B) @270C | % | IS 10810 (7) | ≥ 150 |
| Volume Resistivity @270C | Ohm - cm | IS 3396 | ≥ 1.0 x 1013 |
| Limiting Oxygen Index | % | ASTM D 2863 | ≥ 29 |
| Temperature Index | 0C | ASTM D 2863 | ≥ 250 |
*Test specimen made after milling the granules and then in compression mold at 165 ºC for 10 min with 200kg/cm2 hydraulic pressure.
PF 20 can be processed on extrusion machine at temperature in the range of 1500C- 1800C.This is the guideline temperature range; actual temperature should be optimized by the user depending upon the other processing variables. The screw must have a good homogenizing capacity. For better results pre-drying of granules is recommended @ 70 ± 50C for approximately 15-20 minutes.
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. These are all the typical values only and subject to change without prior intimation. The product is sold upon condition that purchaser should make their own tests to determine the suitability of such product of their particular purpose and purchasers assume all risks and liability for the results of the use of the product.
F443 (A,B & C), RIICO Industrial Area, Phase-I, Bhiwadi, District Alwar 301019 (Rajasthan).